8/16-bit Atmel XMEGA Microcontroller
ATxmega128A4U / ATxmega64A4U* /
ATxmega32A4U / ATxmega16A4U
*Preliminary
Features
High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller
Nonvolatile program and data memories
16K - 128KB of in-system self-programmable flash
4K - 8KB boot section
1K - 2KB EEPROM
2K - 8KB internal SRAM
Peripheral Features
Four-channel DMA controller
Eight-channel event system
Five 16-bit timer/counters
Three timer/counters with 4 output compare or input capture channels
Two timer/counters with 2 output compare or input capture channels
High-resolution extensions on all timer/counters
Advanced waveform extension (AWeX) on one timer/counter
One USB device interface
USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant
32 Endpoints with full configuration flexibility
Five USARTs with IrDA support for one USART
Two Two-wire interfaces with dual address match (I2C and SMBus compatible)
Two serial peripheral interfaces (SPIs)
AES and DES crypto engine
CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator
16-bit real time counter (RTC) with separate oscillator
One twelve-channel, 12-bit, 2msps Analog to Digital Converter
One two-channel, 12-bit, 1msps Digital to Analog Converter
Two Analog Comparators with window compare function, and current sources
External interrupts on all general purpose I/O pins
Programmable watchdog timer with separate on-chip ultra low power oscillator
QTouch® library support
Capacitive touch buttons, sliders and wheels
Special microcontroller features
Power-on reset and programmable brown-out detection
Internal and external clock options with PLL and prescaler
Programmable multilevel interrupt controller
Five sleep modes
Programming and debug interfaces
PDI (program and debug interface)
I/O and packages
34 Programmable I/O pins
44 - lead TQFP
44 - pad VQFN/QFN
49 - ball VFBGA
Operating voltage
1.6 – 3.6V
Operating frequency
0 – 12MHz from 1.6V
0 – 32MHz from 2.7V
Click here to download ATMEL pdf datasheets 8/16-bit Atmel XMEGA Microcontroller ATxmega128A4U / ATxmega64A4U* / ATxmega32A4U / ATxmega16A4U *Preliminary
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Showing posts with label Atmel. Show all posts
Showing posts with label Atmel. Show all posts
Wednesday, May 15, 2013
Atmel ATmega165A/PA/325A/PA/3250A/PA/645A/P/6450A/P 8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash SUMMARY
Atmel ATmega165A/PA/325A/PA/3250A/PA/645A/P/6450A/P
8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash
SUMMARY
Features
• High performance, low power Atmel® AVR® 8-Bit Microcontroller
• Advanced RISC architecture
– 130 powerful instructions – most single clock cycle execution
– 32 × 8 general purpose working registers
– Fully static operation
– Up to 16MIPS throughput at 16MHz (Atmel ATmega165PA/645P)
– Up to 20MIPS throughput at 20MHz (Atmel ATmega165A/325A/325PA/645A/3250A/3250PA/6450A/6450P)
– On-chip 2-cycle multiplier
• High endurance non-volatile memory segments
– In-system self-programmable flash program memory
• 16KBytes (ATmega165A/ATmega165PA)
• 32KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 64KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– EEPROM
• 512Bytes (ATmega165A/ATmega165PA)
• 1Kbytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 2Kbytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– Internal SRAM
• 1KBytes (ATmega165A/ATmega165PA)
• 2KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 4KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– Write/erase cycles: 10,000 flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25C (1)
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True read-while-write operation
– Programming lock for software security
• Atmel QTouch® library support
– Capacitive touch buttons, sliders and wheels
– Atmel QTouch and QMatrix acquisition
– Up to 64 sense channels
• JTAG (IEEE std. 1149.1 compliant) interface
– Boundary-scan capabilities according to the JTAG standard
– Extensive on-chip debug support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real time counter with separate oscillator
– Four PWM channels
– 8-channel, 10-bit ADC
– Programmable serial USART
– Master/Slave SPI Serial Interface
– Universal Serial Interface with Start Condition detector
– Programmable Watchdog Timer with separate on-chip oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on pin change
• Special microcontroller features
– Power-on reset and programmable Brown-out detection
– Internal calibrated oscillator
– External and internal interrupt sources
– Five sleep modes: Idle, ADC Noise Reduction, Power-save, Power-down and Standby
• I/O and packages
– 54/69 programmable I/O lines
– 64/100-lead TQFP, 64-pad QFN/MLF and 64-pad DRQFN
• Speed grade:
– ATmega 165A/165PA/645A/645P: 0 - 16MHz @ 1.8 - 5.5V
– ATmega325A/325PA/3250A/3250PA/6450A/6450P: 0 - 20MHz @ 1.8 - 5.5V
• Temperature range:
– -40°C to 85C industrial
• Ultra-low power consumption (picoPower® devices)
– Active mode:
• 1MHz, 1.8V: 215μA
• 32kHz, 1.8V: 8μA (including oscillator)
– Power-down mode: 0.1μA at 1.8V
– Power-save mode: 0.6μA at 1.8V (Including 32kHz RTC)
Click here to download ATMEL pdf datasheets Atmel ATmega165A/PA/325A/PA/3250A/PA/645A/P/6450A/P 8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash SUMMARY
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash
SUMMARY
Features
• High performance, low power Atmel® AVR® 8-Bit Microcontroller
• Advanced RISC architecture
– 130 powerful instructions – most single clock cycle execution
– 32 × 8 general purpose working registers
– Fully static operation
– Up to 16MIPS throughput at 16MHz (Atmel ATmega165PA/645P)
– Up to 20MIPS throughput at 20MHz (Atmel ATmega165A/325A/325PA/645A/3250A/3250PA/6450A/6450P)
– On-chip 2-cycle multiplier
• High endurance non-volatile memory segments
– In-system self-programmable flash program memory
• 16KBytes (ATmega165A/ATmega165PA)
• 32KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 64KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– EEPROM
• 512Bytes (ATmega165A/ATmega165PA)
• 1Kbytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 2Kbytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– Internal SRAM
• 1KBytes (ATmega165A/ATmega165PA)
• 2KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)
• 4KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)
– Write/erase cycles: 10,000 flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25C (1)
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True read-while-write operation
– Programming lock for software security
• Atmel QTouch® library support
– Capacitive touch buttons, sliders and wheels
– Atmel QTouch and QMatrix acquisition
– Up to 64 sense channels
• JTAG (IEEE std. 1149.1 compliant) interface
– Boundary-scan capabilities according to the JTAG standard
– Extensive on-chip debug support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real time counter with separate oscillator
– Four PWM channels
– 8-channel, 10-bit ADC
– Programmable serial USART
– Master/Slave SPI Serial Interface
– Universal Serial Interface with Start Condition detector
– Programmable Watchdog Timer with separate on-chip oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on pin change
• Special microcontroller features
– Power-on reset and programmable Brown-out detection
– Internal calibrated oscillator
– External and internal interrupt sources
– Five sleep modes: Idle, ADC Noise Reduction, Power-save, Power-down and Standby
• I/O and packages
– 54/69 programmable I/O lines
– 64/100-lead TQFP, 64-pad QFN/MLF and 64-pad DRQFN
• Speed grade:
– ATmega 165A/165PA/645A/645P: 0 - 16MHz @ 1.8 - 5.5V
– ATmega325A/325PA/3250A/3250PA/6450A/6450P: 0 - 20MHz @ 1.8 - 5.5V
• Temperature range:
– -40°C to 85C industrial
• Ultra-low power consumption (picoPower® devices)
– Active mode:
• 1MHz, 1.8V: 215μA
• 32kHz, 1.8V: 8μA (including oscillator)
– Power-down mode: 0.1μA at 1.8V
– Power-save mode: 0.6μA at 1.8V (Including 32kHz RTC)
Click here to download ATMEL pdf datasheets Atmel ATmega165A/PA/325A/PA/3250A/PA/645A/P/6450A/P 8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash SUMMARY
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Atmel 8-bit Microcontroller with 4/8/16/32KBytes In- System Programmable Flash ATmega48A; ATmega48PA; ATmega88A; ATmega88PA; ATmega168A; ATmega168PA; ATmega328; ATmega328P SUMMARY
Atmel 8-bit Microcontroller with 4/8/16/32KBytes In-
System Programmable Flash
ATmega48A; ATmega48PA; ATmega88A; ATmega88PA;
ATmega168A; ATmega168PA; ATmega328; ATmega328P
SUMMARY
Features
• High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 4/8/16/32KBytes of In-System Self-Programmable Flash program memory
– 256/512/512/1KBytes EEPROM
– 512/1K/1K/2KBytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• Atmel® QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix® acquisition
– Up to 64 sense channels
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel 10-bit ADC in TQFP and QFN/MLF package
Temperature Measurement
– 6-channel 10-bit ADC in PDIP Package
Temperature Measurement
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
• I/O and Packages
– 23 Programmable I/O Lines
– 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
• Operating Voltage:
– 1.8 - 5.5V
• Temperature Range:
– -40C to 85C
• Speed Grade:
– 0 - 4MHz@1.8 - 5.5V, 0 - 10MHz@2.7 - 5.5.V, 0 - 20MHz @ 4.5 - 5.5V
• Power Consumption at 1MHz, 1.8V, 25C
– Active Mode: 0.2mA
– Power-down Mode: 0.1μA
– Power-save Mode: 0.75μA (Including 32kHz RTC)
Click here to download ATMEL pdf datasheets Atmel 8-bit Microcontroller with 4/8/16/32KBytes In- System Programmable Flash ATmega48A; ATmega48PA; ATmega88A; ATmega88PA; ATmega168A; ATmega168PA; ATmega328; ATmega328P SUMMARY
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
System Programmable Flash
ATmega48A; ATmega48PA; ATmega88A; ATmega88PA;
ATmega168A; ATmega168PA; ATmega328; ATmega328P
SUMMARY
Features
• High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 4/8/16/32KBytes of In-System Self-Programmable Flash program memory
– 256/512/512/1KBytes EEPROM
– 512/1K/1K/2KBytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• Atmel® QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix® acquisition
– Up to 64 sense channels
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel 10-bit ADC in TQFP and QFN/MLF package
Temperature Measurement
– 6-channel 10-bit ADC in PDIP Package
Temperature Measurement
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
• I/O and Packages
– 23 Programmable I/O Lines
– 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
• Operating Voltage:
– 1.8 - 5.5V
• Temperature Range:
– -40C to 85C
• Speed Grade:
– 0 - 4MHz@1.8 - 5.5V, 0 - 10MHz@2.7 - 5.5.V, 0 - 20MHz @ 4.5 - 5.5V
• Power Consumption at 1MHz, 1.8V, 25C
– Active Mode: 0.2mA
– Power-down Mode: 0.1μA
– Power-save Mode: 0.75μA (Including 32kHz RTC)
Click here to download ATMEL pdf datasheets Atmel 8-bit Microcontroller with 4/8/16/32KBytes In- System Programmable Flash ATmega48A; ATmega48PA; ATmega88A; ATmega88PA; ATmega168A; ATmega168PA; ATmega328; ATmega328P SUMMARY
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
8-bit Atmel tinyAVR Microcontroller with 4K Bytes In-System Programmable Flash ATtiny40
8-bit Atmel tinyAVR Microcontroller with
4K Bytes In-System Programmable Flash
ATtiny40
Features
• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
– 54 Powerful Instructions – Most Single Clock Cycle Execution
– 16 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 12 MIPS Throughput at 12 MHz
• Non-volatile Program and Data Memories
– 4K Bytes of In-System Programmable Flash Program Memory
– 256 Bytes Internal SRAM
– Flash Write/Erase Cycles: 10,000
– Data Retention: 20 Years at 85oC / 100 Years at 25oC
• Peripheral Features
– One 8-bit Timer/Counter with Two PWM Channels
– One 8/16-bit Timer/Counter
– 10-bit Analog to Digital Converter
• 12 Single-Ended Channels
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Master/Slave SPI Serial Interface
– Slave TWI Serial Interface
• Special Microcontroller Features
– In-System Programmable
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, Stand-by and Power-down Modes
– Enhanced Power-on Reset Circuit
– Internal Calibrated Oscillator
• I/O and Packages
– 20-pin SOIC: 18 Programmable I/O Lines
– 20-pin TSSOP: 18 Programmable I/O Lines
– 20-pad VQFN: 18 Programmable I/O Lines
• Operating Voltage:
– 1.8 – 5.5V
• Programming Voltage:
– 5V
• Speed Grade
– 0 – 4 MHz @ 1.8 – 5.5V
– 0 – 8 MHz @ 2.7 – 5.5V
– 0 – 12 MHz @ 4.5 – 5.5V
• Industrial Temperature Range
• Low Power Consumption
– Active Mode:
• 200 μA at 1 MHz and 1.8V
– Idle Mode:
• 25 μA at 1 MHz and 1.8V
– Power-down Mode:
• < 0.1 μA at 1.8V
Click here to download ATMEL pdf datasheets 8-bit Atmel tinyAVR Microcontroller with 4K Bytes In-System Programmable Flash ATtiny40
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
4K Bytes In-System Programmable Flash
ATtiny40
Features
• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
– 54 Powerful Instructions – Most Single Clock Cycle Execution
– 16 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 12 MIPS Throughput at 12 MHz
• Non-volatile Program and Data Memories
– 4K Bytes of In-System Programmable Flash Program Memory
– 256 Bytes Internal SRAM
– Flash Write/Erase Cycles: 10,000
– Data Retention: 20 Years at 85oC / 100 Years at 25oC
• Peripheral Features
– One 8-bit Timer/Counter with Two PWM Channels
– One 8/16-bit Timer/Counter
– 10-bit Analog to Digital Converter
• 12 Single-Ended Channels
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Master/Slave SPI Serial Interface
– Slave TWI Serial Interface
• Special Microcontroller Features
– In-System Programmable
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, Stand-by and Power-down Modes
– Enhanced Power-on Reset Circuit
– Internal Calibrated Oscillator
• I/O and Packages
– 20-pin SOIC: 18 Programmable I/O Lines
– 20-pin TSSOP: 18 Programmable I/O Lines
– 20-pad VQFN: 18 Programmable I/O Lines
• Operating Voltage:
– 1.8 – 5.5V
• Programming Voltage:
– 5V
• Speed Grade
– 0 – 4 MHz @ 1.8 – 5.5V
– 0 – 8 MHz @ 2.7 – 5.5V
– 0 – 12 MHz @ 4.5 – 5.5V
• Industrial Temperature Range
• Low Power Consumption
– Active Mode:
• 200 μA at 1 MHz and 1.8V
– Idle Mode:
• 25 μA at 1 MHz and 1.8V
– Power-down Mode:
• < 0.1 μA at 1.8V
Click here to download ATMEL pdf datasheets 8-bit Atmel tinyAVR Microcontroller with 4K Bytes In-System Programmable Flash ATtiny40
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
8/16-bit Atmel XMEGA D4 Microcontroller ATxmega128D4 / ATxmega64D4 / ATxmega32D4 / ATxmega16D4
8/16-bit Atmel XMEGA D4 Microcontroller
ATxmega128D4 / ATxmega64D4 /
ATxmega32D4 / ATxmega16D4
Features
High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller
Nonvolatile program and data memories
16K - 128KBytes of in-system self-programmable flash
4K - 8KBytes boot section
1K - 2KBytes EEPROM
2K - 8KBytes internal SRAM
Peripheral Features
Four-channel event system
Four 16-bit timer/counters
Two timer/counters with 4 output compare or input capture channels
Two timer/counters with 2 output compare or input capture channels
High-resolution extensions on all timer/counters
Advanced waveform extension (AWeX) on one timer/counter
Two USARTs with IrDA support for one USART
Two Two wire interfaces with dual address match (I2C and SMBus compatible)
Two serial peripheral interfaces (SPIs)
CRC-16 (CRC-CCITT) and CRC-32 (IEEE 802.3) generator
16-bit real time counter (RTC) with separate oscillator
One twelve-channel, 12-bit, 200ksps Analog to Digital Converter
Two Analog Comparators with window compare function, and current sources
External interrupts on all general purpose I/O pins
Programmable watchdog timer with separate on-chip ultra low power oscillator
QTouch® library support
Capacitive touch buttons, sliders and wheels
Special microcontroller features
Power-on reset and programmable brown-out detection
Internal and external clock options with PLL and prescaler
Programmable multilevel interrupt controller
Five sleep modes
Programming and debug interfaces
PDI (program and debug interface)
I/O and packages
34 Programmable I/O pins
44 - lead TQFP
44 - pad VQFN/QFN
49 - ball VFBGA
Operating voltage
1.6 – 3.6V
Operating frequency
0 – 12MHz from 1.6V
0 – 32MHz from 2.7V
Click here to download ATMEL pdf datasheets 8/16-bit Atmel XMEGA D4 Microcontroller ATxmega128D4 / ATxmega64D4 / ATxmega32D4 / ATxmega16D4
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
ATxmega128D4 / ATxmega64D4 /
ATxmega32D4 / ATxmega16D4
Features
High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller
Nonvolatile program and data memories
16K - 128KBytes of in-system self-programmable flash
4K - 8KBytes boot section
1K - 2KBytes EEPROM
2K - 8KBytes internal SRAM
Peripheral Features
Four-channel event system
Four 16-bit timer/counters
Two timer/counters with 4 output compare or input capture channels
Two timer/counters with 2 output compare or input capture channels
High-resolution extensions on all timer/counters
Advanced waveform extension (AWeX) on one timer/counter
Two USARTs with IrDA support for one USART
Two Two wire interfaces with dual address match (I2C and SMBus compatible)
Two serial peripheral interfaces (SPIs)
CRC-16 (CRC-CCITT) and CRC-32 (IEEE 802.3) generator
16-bit real time counter (RTC) with separate oscillator
One twelve-channel, 12-bit, 200ksps Analog to Digital Converter
Two Analog Comparators with window compare function, and current sources
External interrupts on all general purpose I/O pins
Programmable watchdog timer with separate on-chip ultra low power oscillator
QTouch® library support
Capacitive touch buttons, sliders and wheels
Special microcontroller features
Power-on reset and programmable brown-out detection
Internal and external clock options with PLL and prescaler
Programmable multilevel interrupt controller
Five sleep modes
Programming and debug interfaces
PDI (program and debug interface)
I/O and packages
34 Programmable I/O pins
44 - lead TQFP
44 - pad VQFN/QFN
49 - ball VFBGA
Operating voltage
1.6 – 3.6V
Operating frequency
0 – 12MHz from 1.6V
0 – 32MHz from 2.7V
Click here to download ATMEL pdf datasheets 8/16-bit Atmel XMEGA D4 Microcontroller ATxmega128D4 / ATxmega64D4 / ATxmega32D4 / ATxmega16D4
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
8-bit Atmel
Microcontroller
with
16K/32K/64K
Bytes In-System
Programmable
Flash
ATmega164P/V
ATmega324P/V
ATmega644P/V
Features
• High-performance, Low-power Atmel® AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 16K/32K/64K Bytes of In-System Self-programmable Flash program memory
– 512B/1K/2K Bytes EEPROM
– 1K/2K/4K Bytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel, 10-bit ADC
Differential mode with selectable gain at 1×, 10× or 200×
– Byte-oriented Two-wire Serial Interface
– Two Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and
Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, 44-pad VQFN/QFN/MLF (ATmega164P/324P/644P)
– 44-pad DRQFN (ATmega164P)
• Operating Voltages
– 1.8V - 5.5V for ATmega164P/324P/644PV
– 2.7V - 5.5V for ATmega164P/324P/644P
• Speed Grades
– ATmega164P/324P/644PV: 0 - 4 MHz @ 1.8V - 5.5V, 0 - 10 MHz @ 2.7V - 5.5V
– ATmega164P/324P/644P: 0 - 10 MHz @ 2.7V - 5.5V, 0 - 20 MHz @ 4.5V - 5.5V
• Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644PV
– Active: 0.4 mA
– Power-down Mode: 0.1 μA
– Power-save Mode: 0.6 μA (Including 32 kHz RTC)
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with
16K/32K/64K
Bytes In-System
Programmable
Flash
ATmega164P/V
ATmega324P/V
ATmega644P/V
Features
• High-performance, Low-power Atmel® AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 16K/32K/64K Bytes of In-System Self-programmable Flash program memory
– 512B/1K/2K Bytes EEPROM
– 1K/2K/4K Bytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel, 10-bit ADC
Differential mode with selectable gain at 1×, 10× or 200×
– Byte-oriented Two-wire Serial Interface
– Two Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and
Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, 44-pad VQFN/QFN/MLF (ATmega164P/324P/644P)
– 44-pad DRQFN (ATmega164P)
• Operating Voltages
– 1.8V - 5.5V for ATmega164P/324P/644PV
– 2.7V - 5.5V for ATmega164P/324P/644P
• Speed Grades
– ATmega164P/324P/644PV: 0 - 4 MHz @ 1.8V - 5.5V, 0 - 10 MHz @ 2.7V - 5.5V
– ATmega164P/324P/644P: 0 - 10 MHz @ 2.7V - 5.5V, 0 - 20 MHz @ 4.5V - 5.5V
• Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644PV
– Active: 0.4 mA
– Power-down Mode: 0.1 μA
– Power-save Mode: 0.6 μA (Including 32 kHz RTC)
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
8-bit Atmel
Microcontroller
with
16K/32K/64K
Bytes In-System
Programmable
Flash
ATmega164P/V
ATmega324P/V
ATmega644P/V
Features
• High-performance, Low-power Atmel® AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 16K/32K/64K Bytes of In-System Self-programmable Flash program memory
– 512B/1K/2K Bytes EEPROM
– 1K/2K/4K Bytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel, 10-bit ADC
Differential mode with selectable gain at 1×, 10× or 200×
– Byte-oriented Two-wire Serial Interface
– Two Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and
Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, 44-pad VQFN/QFN/MLF (ATmega164P/324P/644P)
– 44-pad DRQFN (ATmega164P)
• Operating Voltages
– 1.8V - 5.5V for ATmega164P/324P/644PV
– 2.7V - 5.5V for ATmega164P/324P/644P
• Speed Grades
– ATmega164P/324P/644PV: 0 - 4 MHz @ 1.8V - 5.5V, 0 - 10 MHz @ 2.7V - 5.5V
– ATmega164P/324P/644P: 0 - 10 MHz @ 2.7V - 5.5V, 0 - 20 MHz @ 4.5V - 5.5V
• Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644PV
– Active: 0.4 mA
– Power-down Mode: 0.1 μA
– Power-save Mode: 0.6 μA (Including 32 kHz RTC)
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with
16K/32K/64K
Bytes In-System
Programmable
Flash
ATmega164P/V
ATmega324P/V
ATmega644P/V
Features
• High-performance, Low-power Atmel® AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 16K/32K/64K Bytes of In-System Self-programmable Flash program memory
– 512B/1K/2K Bytes EEPROM
– 1K/2K/4K Bytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
– Data retention: 20 years at 85C/100 years at 25C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel, 10-bit ADC
Differential mode with selectable gain at 1×, 10× or 200×
– Byte-oriented Two-wire Serial Interface
– Two Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and
Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, 44-pad VQFN/QFN/MLF (ATmega164P/324P/644P)
– 44-pad DRQFN (ATmega164P)
• Operating Voltages
– 1.8V - 5.5V for ATmega164P/324P/644PV
– 2.7V - 5.5V for ATmega164P/324P/644P
• Speed Grades
– ATmega164P/324P/644PV: 0 - 4 MHz @ 1.8V - 5.5V, 0 - 10 MHz @ 2.7V - 5.5V
– ATmega164P/324P/644P: 0 - 10 MHz @ 2.7V - 5.5V, 0 - 20 MHz @ 4.5V - 5.5V
• Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644PV
– Active: 0.4 mA
– Power-down Mode: 0.1 μA
– Power-save Mode: 0.6 μA (Including 32 kHz RTC)
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 16K/32K/64K Bytes In-System Programmable Flash ATmega164P/V ATmega324P/V ATmega644P/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Two-wire Serial EEPROM 1K (128 x 8) AT24C01B download ATMEL pdf datasheets
Two-wire
Serial EEPROM
1K (128 x 8)
AT24C01B
Features
• Low-voltage and Standard-voltage Operation
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23,
8-lead TSSOP and 8-ball dBGA2 Packages
• Lead-free/Halogen-free
• Die Sales: Wafer Form and Tape and Reel
Description
The AT24C01B provides 1024 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 128 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24C01B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead
SOT23, 8-lead TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire
serial interface. In addition, the AT24C01B is available in 1.8V (1.8V to 5.5V) version.
Click here to download ATMEL pdf datasheets Two-wire Serial EEPROM 1K (128 x 8) AT24C01B
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Serial EEPROM
1K (128 x 8)
AT24C01B
Features
• Low-voltage and Standard-voltage Operation
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23,
8-lead TSSOP and 8-ball dBGA2 Packages
• Lead-free/Halogen-free
• Die Sales: Wafer Form and Tape and Reel
Description
The AT24C01B provides 1024 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 128 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24C01B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead
SOT23, 8-lead TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire
serial interface. In addition, the AT24C01B is available in 1.8V (1.8V to 5.5V) version.
Click here to download ATMEL pdf datasheets Two-wire Serial EEPROM 1K (128 x 8) AT24C01B
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Two-wire Serial EEPROM 2K (256 x 8) AT24HC02B download ATMEL pdf datasheets
Two-wire Serial
EEPROM
2K (256 x 8)
AT24HC02B
1. Features
• Write Protect Pin for Hardware Data Protection
– Utilizes Different Array Protection Compared to the AT24C02B
• Low-voltage and Standard-voltage Operation
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 256 x 8 (2K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 1 MHz (5V) and 400 kHz (1.8V, 2.5V, 2.7V) Clock Rate
• 8-byte Page
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms Max)
• High Reliability
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
• 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages
• Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
2. Description
The AT24HC02B provides 2048 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 256 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24HC02B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a
two-wire serial interface. In addition, the entire family is available in 1.8V (1.8V to
5.5V) version.
Click here to download ATMEL pdf datasheets Two-wire Serial EEPROM 2K (256 x 8) AT24HC02B
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
EEPROM
2K (256 x 8)
AT24HC02B
1. Features
• Write Protect Pin for Hardware Data Protection
– Utilizes Different Array Protection Compared to the AT24C02B
• Low-voltage and Standard-voltage Operation
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 256 x 8 (2K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 1 MHz (5V) and 400 kHz (1.8V, 2.5V, 2.7V) Clock Rate
• 8-byte Page
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms Max)
• High Reliability
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
• 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages
• Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
2. Description
The AT24HC02B provides 2048 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 256 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24HC02B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a
two-wire serial interface. In addition, the entire family is available in 1.8V (1.8V to
5.5V) version.
Click here to download ATMEL pdf datasheets Two-wire Serial EEPROM 2K (256 x 8) AT24HC02B
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Tuesday, May 14, 2013
8-bit Microcontroller with 32K/64K/128K Bytes of ISP Flash and CAN Controller AT90CAN32 AT90CAN64 AT90CAN128
8-bit
Microcontroller
with
32K/64K/128K
Bytes of
ISP Flash
and
CAN Controller
AT90CAN32
AT90CAN64
AT90CAN128
Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 133 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers + Peripheral Control Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
• Non volatile Program and Data Memories
– 32K/64K/128K Bytes of In-System Reprogrammable Flash (AT90CAN32/64/128)
• Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
• Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes
• In-System Programming by On-Chip Boot Program (CAN, UART, ...)
• True Read-While-Write Operation
– 1K/2K/4K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles) (AT90CAN32/64/128)
– 2K/4K/4K Bytes Internal SRAM (AT90CAN32/64/128)
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits
– Extensive On-chip Debug Support
• CAN Controller 2.0A & 2.0B - ISO 16845 Certified (1)
– 15 Full Message Objects with Separate Identifier Tags and Masks
– Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes
– 1Mbits/s Maximum Transfer Rate at 8 MHz
– Time stamping, TTC & Listening Mode (Spying or Autobaud)
• Peripheral Features
– Programmable Watchdog Timer with On-chip Oscillator
– 8-bit Synchronous Timer/Counter-0
• 10-bit Prescaler
• External Event Counter
• Output Compare or 8-bit PWM Output
– 8-bit Asynchronous Timer/Counter-2
• 10-bit Prescaler
• External Event Counter
• Output Compare or 8-Bit PWM Output
• 32Khz Oscillator for RTC Operation
– Dual 16-bit Synchronous Timer/Counters-1 & 3
• 10-bit Prescaler
• Input Capture with Noise Canceler
• External Event Counter
• 3-Output Compare or 16-Bit PWM Output
• Output Compare Modulation
– 8-channel, 10-bit SAR ADC
• 8 Single-ended Channels
• 7 Differential Channels
• 2 Differential Channels With Programmable Gain at 1x, 10x, or 200x
– On-chip Analog Comparator
– Byte-oriented Two-wire Serial Interface
– Dual Programmable Serial USART
– Master/Slave SPI Serial Interface
• Programming Flash (Hardware ISP)
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– 8 External Interrupt Sources
– 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby
– Software Selectable Clock Frequency
– Global Pull-up Disable
• I/O and Packages
– 53 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
• Operating Voltages: 2.7 - 5.5V
• Operating temperature: Industrial (-40°C to +85°C)
• Maximum Frequency: 8 MHz at 2.7V, 16 MHz at 4.5V
Click here to download ATMEL pdf datasheets 8-bit Microcontroller with 32K/64K/128K Bytes of ISP Flash and CAN Controller AT90CAN32 AT90CAN64 AT90CAN128
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with
32K/64K/128K
Bytes of
ISP Flash
and
CAN Controller
AT90CAN32
AT90CAN64
AT90CAN128
Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 133 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers + Peripheral Control Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
• Non volatile Program and Data Memories
– 32K/64K/128K Bytes of In-System Reprogrammable Flash (AT90CAN32/64/128)
• Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
• Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes
• In-System Programming by On-Chip Boot Program (CAN, UART, ...)
• True Read-While-Write Operation
– 1K/2K/4K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles) (AT90CAN32/64/128)
– 2K/4K/4K Bytes Internal SRAM (AT90CAN32/64/128)
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits
– Extensive On-chip Debug Support
• CAN Controller 2.0A & 2.0B - ISO 16845 Certified (1)
– 15 Full Message Objects with Separate Identifier Tags and Masks
– Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes
– 1Mbits/s Maximum Transfer Rate at 8 MHz
– Time stamping, TTC & Listening Mode (Spying or Autobaud)
• Peripheral Features
– Programmable Watchdog Timer with On-chip Oscillator
– 8-bit Synchronous Timer/Counter-0
• 10-bit Prescaler
• External Event Counter
• Output Compare or 8-bit PWM Output
– 8-bit Asynchronous Timer/Counter-2
• 10-bit Prescaler
• External Event Counter
• Output Compare or 8-Bit PWM Output
• 32Khz Oscillator for RTC Operation
– Dual 16-bit Synchronous Timer/Counters-1 & 3
• 10-bit Prescaler
• Input Capture with Noise Canceler
• External Event Counter
• 3-Output Compare or 16-Bit PWM Output
• Output Compare Modulation
– 8-channel, 10-bit SAR ADC
• 8 Single-ended Channels
• 7 Differential Channels
• 2 Differential Channels With Programmable Gain at 1x, 10x, or 200x
– On-chip Analog Comparator
– Byte-oriented Two-wire Serial Interface
– Dual Programmable Serial USART
– Master/Slave SPI Serial Interface
• Programming Flash (Hardware ISP)
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– 8 External Interrupt Sources
– 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby
– Software Selectable Clock Frequency
– Global Pull-up Disable
• I/O and Packages
– 53 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
• Operating Voltages: 2.7 - 5.5V
• Operating temperature: Industrial (-40°C to +85°C)
• Maximum Frequency: 8 MHz at 2.7V, 16 MHz at 4.5V
Click here to download ATMEL pdf datasheets 8-bit Microcontroller with 32K/64K/128K Bytes of ISP Flash and CAN Controller AT90CAN32 AT90CAN64 AT90CAN128
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
8-bit Flash Microcontroller AT89C51ID2 download ATMEL pdf datasheets
8-bit Flash
Microcontroller
AT89C51ID2
Features
• 80C52 Compatible
– 8051 Instruction Compatible
– Six 8-bit I/O Ports (64 pins or 68 Pins Versions)
– Four 8-bit I/O Ports (44 Pins Version)
– Three 16-bit Timer/Counters
– 256 bytes Scratch Pad RAM
– 10 Interrupt Sources With 4 Priority Levels
• ISP (In-System Programming) Using Standard VCC Power Supply
• Integrated Power Monitor (POR/PFD) to Supervise Internal Power Supply
• Boot ROM Contains Low Level Flash Programming Routines and a Default Serial
Loader
• High-speed Architecture
– In Standard Mode:
40 MHz (Vcc 2.7V to 5.5V, Both Internal and External Code Execution)
60 MHz (Vcc 4.5V to 5.5V and Internal Code Execution Only)
– In X2 Mode (6 Clocks/Machine Cycle)
20 MHz (Vcc 2.7V to 5.5V, Both Internal and External Code Execution)
30 MHz (Vcc 4.5V to 5.5V and Internal Code Execution Only)
• 64K bytes On-chip Flash Program/Data Memory
– Byte and Page (128 bytes) Erase and Write
– 100k Write Cycles
• On-chip 1792 bytes Expanded RAM (XRAM)
– Software Selectable Size (0, 256, 512, 768, 1024, 1792 bytes)
– 768 bytes Selected at Reset for T89C51RD2 Compatibility
• On-chip 2048 bytes EEPROM block for Data Storage
– 100k Write Cycles
• Dual Data Pointer
• 32 KHz Crystal Oscillator
• Variable Length MOVX for Slow RAM/Peripherals
• Improved X2 Mode with Independant Selection for CPU and Each Peripheral
• Keyboard Interrupt Interface on Port 1
• SPI Interface (Master/Slave Mode)
• 8-bit Clock Prescaler
• Two Wire Interface 400K bit/s
• Programmable Counter Array with:
– High Speed Output
– Compare/Capture
– Pulse Width Modulator
– Watchdog Timer Capabilities
• Asynchronous Port Reset
• Full Duplex Enhanced UART with Dedicated Internal Baud Rate Generator
• Low EMI (inhibit ALE)
• Hardware Watchdog Timer (One-time Enabled with Reset-Out), Power-Off Flag
• Power Control Modes: Idle Mode, Power-down Mode
• Power Supply: 2.7V to 5.5V
• Temperature Ranges: Industrial (-40 to +85°C)
• Packages: PLCC44, VQFP44
Description
AT89C51ID2 is a high performance CMOS Flash version of the 80C51 CMOS single
chip 8-bit microcontroller. It contains a 64 Kbytes Flash memory block for program
and for data.
The 64 Kbytes Flash memory can be programmed either in parallel mode or in serial
mode with the ISP capability or with software. The programming voltage is internally
generated from the standard VCC pin.
Click here to download ATMEL pdf datasheets 8-bit Flash Microcontroller AT89C51ID2
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
AT89C51ID2
Features
• 80C52 Compatible
– 8051 Instruction Compatible
– Six 8-bit I/O Ports (64 pins or 68 Pins Versions)
– Four 8-bit I/O Ports (44 Pins Version)
– Three 16-bit Timer/Counters
– 256 bytes Scratch Pad RAM
– 10 Interrupt Sources With 4 Priority Levels
• ISP (In-System Programming) Using Standard VCC Power Supply
• Integrated Power Monitor (POR/PFD) to Supervise Internal Power Supply
• Boot ROM Contains Low Level Flash Programming Routines and a Default Serial
Loader
• High-speed Architecture
– In Standard Mode:
40 MHz (Vcc 2.7V to 5.5V, Both Internal and External Code Execution)
60 MHz (Vcc 4.5V to 5.5V and Internal Code Execution Only)
– In X2 Mode (6 Clocks/Machine Cycle)
20 MHz (Vcc 2.7V to 5.5V, Both Internal and External Code Execution)
30 MHz (Vcc 4.5V to 5.5V and Internal Code Execution Only)
• 64K bytes On-chip Flash Program/Data Memory
– Byte and Page (128 bytes) Erase and Write
– 100k Write Cycles
• On-chip 1792 bytes Expanded RAM (XRAM)
– Software Selectable Size (0, 256, 512, 768, 1024, 1792 bytes)
– 768 bytes Selected at Reset for T89C51RD2 Compatibility
• On-chip 2048 bytes EEPROM block for Data Storage
– 100k Write Cycles
• Dual Data Pointer
• 32 KHz Crystal Oscillator
• Variable Length MOVX for Slow RAM/Peripherals
• Improved X2 Mode with Independant Selection for CPU and Each Peripheral
• Keyboard Interrupt Interface on Port 1
• SPI Interface (Master/Slave Mode)
• 8-bit Clock Prescaler
• Two Wire Interface 400K bit/s
• Programmable Counter Array with:
– High Speed Output
– Compare/Capture
– Pulse Width Modulator
– Watchdog Timer Capabilities
• Asynchronous Port Reset
• Full Duplex Enhanced UART with Dedicated Internal Baud Rate Generator
• Low EMI (inhibit ALE)
• Hardware Watchdog Timer (One-time Enabled with Reset-Out), Power-Off Flag
• Power Control Modes: Idle Mode, Power-down Mode
• Power Supply: 2.7V to 5.5V
• Temperature Ranges: Industrial (-40 to +85°C)
• Packages: PLCC44, VQFP44
Description
AT89C51ID2 is a high performance CMOS Flash version of the 80C51 CMOS single
chip 8-bit microcontroller. It contains a 64 Kbytes Flash memory block for program
and for data.
The 64 Kbytes Flash memory can be programmed either in parallel mode or in serial
mode with the ISP capability or with software. The programming voltage is internally
generated from the standard VCC pin.
Click here to download ATMEL pdf datasheets 8-bit Flash Microcontroller AT89C51ID2
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Sunday, May 12, 2013
AT91SAM ARM-based Flash MCU SAM3X SAM3A Series download ATMEL pdf datasheets
AT91SAM
ARM-based
Flash MCU
SAM3X
SAM3A
Series
Features
• Core
– ARM® Cortex®-M3 revision 2.0 running at up to 84 MHz
– Memory Protection Unit (MPU)
– Thumb®-2 instruction set
– 24-bit SysTick Counter
– Nested Vector Interrupt Controller
• Memories
– From 256 to 512 Kbytes embedded Flash, 128-bit wide access, memory accelerator, dual bank
– From 32 to 100 Kbytes embedded SRAM with dual banks
– 16 Kbytes ROM with embedded bootloader routines (UART, USB) and IAP routines
– Static Memory Controller (SMC): SRAM, NOR, NAND support. NAND Flash
controller with 4-kbyte RAM buffer and ECC
• System
– Embedded voltage regulator for single supply operation
– POR, BOD and Watchdog for safe reset
– Quartz or ceramic resonator oscillators: 3 to 20 MHz main and optional low power
32.768 kHz for RTC or device clock.
– High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz Default
Frequency for fast device startup
– Slow Clock Internal RC oscillator as permanent clock for device clock in low power
mode
– One PLL for device clock and one dedicated PLL for USB 2.0 High Speed Mini
Host/Device
– Temperature Sensor
– Up to 17 peripheral DMA (PDC) channels and 6-channel central DMA plus
dedicated DMA for High-Speed USB Mini Host/Device and Ethernet MAC
• Low Power Modes
– Sleep and Backup modes, down to 2.5 μA in Backup mode.
– Backup domain: VDDBU pin, RTC, eight 32-bit backup registers
– Ultra Low-power RTC
• Peripherals
– USB 2.0 Device/Mini Host: 480 Mbps, 4-kbyte FIFO, up to 10 bidirectional
Endpoints, dedicated DMA
– Up to 4 USARTs (ISO7816, IrDA®, Flow Control, SPI, Manchester and LIN support)
and one UART
– 2 TWI (I2C compatible), up to 6 SPIs, 1 SSC (I2S), 1 HSMCI (SDIO/SD/MMC) with up
to 2 slots
– 9-Channel 32-bit Timer/Counter (TC) for capture, compare and PWM mode,
Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor
– Up to 8-channel 16-bit PWM (PWMC) with Complementary Output, Fault Input, 12-
bit Dead Time Generator Counter for Motor Control
– 32-bit Real Time Timer (RTT) and RTC with calendar and alarm features
– 16-channel 12-bit 1Msps ADC with differential input mode and programmable gain
stage
– One 2-channel 12-bit 1 MSPS DAC
– One Ethernet MAC 10/100 (EMAC) with dedicated DMA
– Two CAN Controller with eight Mailboxes
– One True Random Number Generator (TRNG)
– Write Protected Registers
• I/O
– Up to 103 I/O lines with external interrupt capability (edge or level sensitivity),
debouncing, glitch filtering and on-die Series Resistor Termination
– Up to Six 32-bit Parallel Input/Outputs (PIO)
• Packages
– 100-lead LQFP, 14 x 14 mm, pitch 0.5 mm
– 100-ball LFBGA, 9 x 9 mm, pitch 0.8 mm
– 144-lead LQFP, 20 x 20 mm, pitch 0.5 mm
– 144-ball LFBGA, 10 x 10 mm, pitch 0.8 mm
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Flash MCU SAM3X SAM3A Series
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
ARM-based
Flash MCU
SAM3X
SAM3A
Series
Features
• Core
– ARM® Cortex®-M3 revision 2.0 running at up to 84 MHz
– Memory Protection Unit (MPU)
– Thumb®-2 instruction set
– 24-bit SysTick Counter
– Nested Vector Interrupt Controller
• Memories
– From 256 to 512 Kbytes embedded Flash, 128-bit wide access, memory accelerator, dual bank
– From 32 to 100 Kbytes embedded SRAM with dual banks
– 16 Kbytes ROM with embedded bootloader routines (UART, USB) and IAP routines
– Static Memory Controller (SMC): SRAM, NOR, NAND support. NAND Flash
controller with 4-kbyte RAM buffer and ECC
• System
– Embedded voltage regulator for single supply operation
– POR, BOD and Watchdog for safe reset
– Quartz or ceramic resonator oscillators: 3 to 20 MHz main and optional low power
32.768 kHz for RTC or device clock.
– High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz Default
Frequency for fast device startup
– Slow Clock Internal RC oscillator as permanent clock for device clock in low power
mode
– One PLL for device clock and one dedicated PLL for USB 2.0 High Speed Mini
Host/Device
– Temperature Sensor
– Up to 17 peripheral DMA (PDC) channels and 6-channel central DMA plus
dedicated DMA for High-Speed USB Mini Host/Device and Ethernet MAC
• Low Power Modes
– Sleep and Backup modes, down to 2.5 μA in Backup mode.
– Backup domain: VDDBU pin, RTC, eight 32-bit backup registers
– Ultra Low-power RTC
• Peripherals
– USB 2.0 Device/Mini Host: 480 Mbps, 4-kbyte FIFO, up to 10 bidirectional
Endpoints, dedicated DMA
– Up to 4 USARTs (ISO7816, IrDA®, Flow Control, SPI, Manchester and LIN support)
and one UART
– 2 TWI (I2C compatible), up to 6 SPIs, 1 SSC (I2S), 1 HSMCI (SDIO/SD/MMC) with up
to 2 slots
– 9-Channel 32-bit Timer/Counter (TC) for capture, compare and PWM mode,
Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor
– Up to 8-channel 16-bit PWM (PWMC) with Complementary Output, Fault Input, 12-
bit Dead Time Generator Counter for Motor Control
– 32-bit Real Time Timer (RTT) and RTC with calendar and alarm features
– 16-channel 12-bit 1Msps ADC with differential input mode and programmable gain
stage
– One 2-channel 12-bit 1 MSPS DAC
– One Ethernet MAC 10/100 (EMAC) with dedicated DMA
– Two CAN Controller with eight Mailboxes
– One True Random Number Generator (TRNG)
– Write Protected Registers
• I/O
– Up to 103 I/O lines with external interrupt capability (edge or level sensitivity),
debouncing, glitch filtering and on-die Series Resistor Termination
– Up to Six 32-bit Parallel Input/Outputs (PIO)
• Packages
– 100-lead LQFP, 14 x 14 mm, pitch 0.5 mm
– 100-ball LFBGA, 9 x 9 mm, pitch 0.8 mm
– 144-lead LQFP, 20 x 20 mm, pitch 0.5 mm
– 144-ball LFBGA, 10 x 10 mm, pitch 0.8 mm
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Flash MCU SAM3X SAM3A Series
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
High performance EEPROM CPLD ATF1502ASV download ATMEL pdf datasheets
Highperformance
EEPROM CPLD
ATF1502ASV
Features
?High-density, High-performance, Electrically-erasable Complex Programmable
Logic Device
?3.0 to 3.6V Operating Range
?32 Macrocells
?5 Product Terms per Macrocell, Expandable up to 40 per Macrocell
?44 Pins
?15 ns Maximum Pin-to-pin Delay
?Registered Operation up to 77 MHz
?Enhanced Routing Resources
?In-System Programmability (ISP) via JTAG
?Flexible Logic Macrocell
?D/T Latch Configurable Flip-flops
?Global and Individual Register Control Signals
?Global and Individual Output Enable
?Programmable Output Slew Rate
?Programmable Output Open Collector Option
?Maximum Logic Utilization by Burying a Register with a COM Output
?Advanced Power Management Features
?Pin-controlled 0.75 mA Standby Mode
?Programmable Pin-keeper Inputs and I/Os
?Reduced-power Feature per Macrocell
?Available in Commercial and Industrial Temperature Ranges
?Available in 44-lead PLCC and TQFP
?Advanced EEPROM Technology
?100% Tested
?Completely Reprogrammable
?10,000 Program/Erase Cycles
?20-year Data Retention
?2000V ESD Protection
?200 mA Latch-up Immunity
?JTAG Boundary-scan Testing to IEEE Std. 1149.1-1990 and 1149.1a-1993 Supported
?PCI-compliant
?Security Fuse Feature
?Green (Pb/Halide-fee/RoHS Compliant) Package Options
Enhanced Features
?Improved Connectivity (Additional Feedback Routing, Alternate Input Routing)
?Output Enable Product Terms
?D Latch Mode
?Combinatorial Output with Registered Feedback within Any Macrocell
?Three Global Clock Pins
?Fast Registered Input from Product Term
?Programmable 揚in-keeper?Option
?VCC Power-up Reset Option
?Pull-up Option on JTAG Pins TMS and TDI
?Advanced Power Management Features
?Individual Macrocell Power Option
Click here to download ATMEL pdf datasheets High performance EEPROM CPLD ATF1502ASV
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
EEPROM CPLD
ATF1502ASV
Features
?High-density, High-performance, Electrically-erasable Complex Programmable
Logic Device
?3.0 to 3.6V Operating Range
?32 Macrocells
?5 Product Terms per Macrocell, Expandable up to 40 per Macrocell
?44 Pins
?15 ns Maximum Pin-to-pin Delay
?Registered Operation up to 77 MHz
?Enhanced Routing Resources
?In-System Programmability (ISP) via JTAG
?Flexible Logic Macrocell
?D/T Latch Configurable Flip-flops
?Global and Individual Register Control Signals
?Global and Individual Output Enable
?Programmable Output Slew Rate
?Programmable Output Open Collector Option
?Maximum Logic Utilization by Burying a Register with a COM Output
?Advanced Power Management Features
?Pin-controlled 0.75 mA Standby Mode
?Programmable Pin-keeper Inputs and I/Os
?Reduced-power Feature per Macrocell
?Available in Commercial and Industrial Temperature Ranges
?Available in 44-lead PLCC and TQFP
?Advanced EEPROM Technology
?100% Tested
?Completely Reprogrammable
?10,000 Program/Erase Cycles
?20-year Data Retention
?2000V ESD Protection
?200 mA Latch-up Immunity
?JTAG Boundary-scan Testing to IEEE Std. 1149.1-1990 and 1149.1a-1993 Supported
?PCI-compliant
?Security Fuse Feature
?Green (Pb/Halide-fee/RoHS Compliant) Package Options
Enhanced Features
?Improved Connectivity (Additional Feedback Routing, Alternate Input Routing)
?Output Enable Product Terms
?D Latch Mode
?Combinatorial Output with Registered Feedback within Any Macrocell
?Three Global Clock Pins
?Fast Registered Input from Product Term
?Programmable 揚in-keeper?Option
?VCC Power-up Reset Option
?Pull-up Option on JTAG Pins TMS and TDI
?Advanced Power Management Features
?Individual Macrocell Power Option
Click here to download ATMEL pdf datasheets High performance EEPROM CPLD ATF1502ASV
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
STK500 User Guide download ATMEL pdf datasheets
STK500
..............................................................................................
User Guide
Introduction
Congratulations on your purchase of the AVR?STK500 Flash Microcontroller Starter
Kit. The STK500 is a complete starter kit and development system for the AVR Flash
Microcontroller from Atmel Corporation. It is designed to give designers a quick start to
develop code on the AVR and for prototyping and testing of new designs.
1.1 Starter Kit
Features
AVR Studio?Compatible
RS-232 Interface to PC for Programming and Control
Regulated Power Supply for 10 - 15V DC Power
Sockets for 8-pin, 20-pin, 28-pin, and 40-pin AVR Devices
Parallel and Serial High-voltage Programming of AVR Devices
Serial In-System Programming (ISP) of AVR Devices
In-System Programmer for Programming AVR Devices in External Target System
Reprogramming of AVR Devices
8 Push Buttons for General Use
8 LEDs for General Use
All AVR I/O Ports Easily Accessible through Pin Header Connectors
Additional RS-232 Port for General Use
Expansion Connectors for Plug-in Modules and Prototyping Area
(NB! No longer valid: "On-board 2-Mbit DataFlash?for Nonvolatile Data Storage")
The STK500 is supported by AVR Studio, version 3.2 or higher. For up-to-date information
on this and other AVR tool products, please read the document 揳vrtools.pdf? The
newest version of AVR Studio, 揳vrtools.pdf?and this user guide can be found in the
AVR section of the Atmel web site, www.atmel.com.
Click here to download ATMEL pdf datasheets STK500 User
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
..............................................................................................
User Guide
Introduction
Congratulations on your purchase of the AVR?STK500 Flash Microcontroller Starter
Kit. The STK500 is a complete starter kit and development system for the AVR Flash
Microcontroller from Atmel Corporation. It is designed to give designers a quick start to
develop code on the AVR and for prototyping and testing of new designs.
1.1 Starter Kit
Features
AVR Studio?Compatible
RS-232 Interface to PC for Programming and Control
Regulated Power Supply for 10 - 15V DC Power
Sockets for 8-pin, 20-pin, 28-pin, and 40-pin AVR Devices
Parallel and Serial High-voltage Programming of AVR Devices
Serial In-System Programming (ISP) of AVR Devices
In-System Programmer for Programming AVR Devices in External Target System
Reprogramming of AVR Devices
8 Push Buttons for General Use
8 LEDs for General Use
All AVR I/O Ports Easily Accessible through Pin Header Connectors
Additional RS-232 Port for General Use
Expansion Connectors for Plug-in Modules and Prototyping Area
(NB! No longer valid: "On-board 2-Mbit DataFlash?for Nonvolatile Data Storage")
The STK500 is supported by AVR Studio, version 3.2 or higher. For up-to-date information
on this and other AVR tool products, please read the document 揳vrtools.pdf? The
newest version of AVR Studio, 揳vrtools.pdf?and this user guide can be found in the
AVR section of the Atmel web site, www.atmel.com.
Click here to download ATMEL pdf datasheets STK500 User
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
AT91SAM7SE-EK Evaluation Board User Guide download ATMEL pdf datasheets
AT91SAM7SE-EK Evaluation Board
..............................................................................................
User Guide
Scope The AT91SAM7SE-EK evaluation board enables the evaluation of and code development
for applications running on an AT91SAM7SE device.
This guide focuses on the AT91SAM7SE-EK board as an evaluation platform.
1.2 Deliverables
1.2.1 Standard Version
AT91SAM7S-EK
VAR
The AT91SAM7SE-EK package contains the following items:
! An AT91SAM7SE-EK board
! One Universal input AC/DC power supply with US and Europe plug adapter
! One A/B-type USB cable
! One serial RS232 cable
! One CD-ROM containing summary and full datasheets, datasheets with electrical and
mechanical characteristics, application notes and getting started documents for all
development boards and AT91 microcontrollers. An AT91 software package with C
and assembly listings is also provided. This allows the user to begin evaluating the
AT91 ARM?Thumb?32-bit microcontroller quickly.
1.3 AT91SAM7SEEK
Evaluation
Board
The board is equipped with an AT91SAM7SE512 (128-pin LQFP package) together with
the following:
! 32 Mbytes of SDRAM memory
! 256 Mbytes of NAND Flash memory
! One USB device port interface
! One DBGU serial communication port
! One additional serial communication port with RTS/CTS handshake control
! One JTAG/ICE debug interface
! One Atmel AT73C213 Stereo Audio DAC
Setting Up the AT91SAM7SE-EK
Board
2.1 Electrostatic
Warning
The AT91SAM7SE-EK evaluation board is shipped in protective anti-static packaging.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
2.2 Requirements In order to set up the AT91SAM7SE-EK evaluation board, the following items are
needed:
! The AT91SAM7SE-EK evaluation board itself.
! AC/DC power adapter (5V at 2A), 2.1 mm x 5.5 mm
Click here to download ATMEL pdf datasheets AT91SAM7SE-EK Evaluation Board User Guide
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
..............................................................................................
User Guide
Scope The AT91SAM7SE-EK evaluation board enables the evaluation of and code development
for applications running on an AT91SAM7SE device.
This guide focuses on the AT91SAM7SE-EK board as an evaluation platform.
1.2 Deliverables
1.2.1 Standard Version
AT91SAM7S-EK
VAR
The AT91SAM7SE-EK package contains the following items:
! An AT91SAM7SE-EK board
! One Universal input AC/DC power supply with US and Europe plug adapter
! One A/B-type USB cable
! One serial RS232 cable
! One CD-ROM containing summary and full datasheets, datasheets with electrical and
mechanical characteristics, application notes and getting started documents for all
development boards and AT91 microcontrollers. An AT91 software package with C
and assembly listings is also provided. This allows the user to begin evaluating the
AT91 ARM?Thumb?32-bit microcontroller quickly.
1.3 AT91SAM7SEEK
Evaluation
Board
The board is equipped with an AT91SAM7SE512 (128-pin LQFP package) together with
the following:
! 32 Mbytes of SDRAM memory
! 256 Mbytes of NAND Flash memory
! One USB device port interface
! One DBGU serial communication port
! One additional serial communication port with RTS/CTS handshake control
! One JTAG/ICE debug interface
! One Atmel AT73C213 Stereo Audio DAC
Setting Up the AT91SAM7SE-EK
Board
2.1 Electrostatic
Warning
The AT91SAM7SE-EK evaluation board is shipped in protective anti-static packaging.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
2.2 Requirements In order to set up the AT91SAM7SE-EK evaluation board, the following items are
needed:
! The AT91SAM7SE-EK evaluation board itself.
! AC/DC power adapter (5V at 2A), 2.1 mm x 5.5 mm
Click here to download ATMEL pdf datasheets AT91SAM7SE-EK Evaluation Board User Guide
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash ATmega640/V ATmega1280/V ATmega1281/V ATmega2560/V ATmega2561/V
8-bit Atmel
Microcontroller
with
64K/128K/256K
Bytes In-System
Programmable
Flash
ATmega640/V
ATmega1280/V
ATmega1281/V
ATmega2560/V
ATmega2561/V
Features
. High Performance, Low Power AtmelR AVRR 8-Bit Microcontroller
. Advanced RISC Architecture
. 135 Powerful Instructions . Most Single Clock Cycle Execution
. 32 亊 8 General Purpose Working Registers
. Fully Static Operation
. Up to 16 MIPS Throughput at 16MHz
. On-Chip 2-cycle Multiplier
. High Endurance Non-volatile Memory Segments
. 64K/128K/256KBytes of In-System Self-Programmable Flash
. 4Kbytes EEPROM
. 8Kbytes Internal SRAM
. Write/Erase Cycles:10,000 Flash/100,000 EEPROM
. Data retention: 20 years at 85亱C/ 100 years at 25亱C
. Optional Boot Code Section with Independent Lock Bits
. In-System Programming by On-chip Boot Program
. True Read-While-Write Operation
. Programming Lock for Software Security
. Endurance: Up to 64Kbytes Optional External Memory Space
. AtmelR QTouchR library support
. Capacitive touch buttons, sliders and wheels
. QTouch and QMatrixR acquisition
. Up to 64 sense channels
. JTAG (IEEE std. 1149.1 compliant) Interface
. Boundary-scan Capabilities According to the JTAG Standard
. Extensive On-chip Debug Support
. Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
. Peripheral Features
. Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
. Four 16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
. Real Time Counter with Separate Oscillator
. Four 8-bit PWM Channels
. Six/Twelve PWM Channels with Programmable Resolution from 2 to 16 Bits
(ATmega1281/2561, ATmega640/1280/2560)
. Output Compare Modulator
. 8/16-channel, 10-bit ADC (ATmega1281/2561, ATmega640/1280/2560)
. Two/Four Programmable Serial USART (ATmega1281/2561, ATmega640/1280/2560)
. Master/Slave SPI Serial Interface
. Byte Oriented 2-wire Serial Interface
. Programmable Watchdog Timer with Separate On-chip Oscillator
. On-chip Analog Comparator
. Interrupt and Wake-up on Pin Change
. Special Microcontroller Features
. Power-on Reset and Programmable Brown-out Detection
. Internal Calibrated Oscillator
. External and Internal Interrupt Sources
. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
and Extended Standby
. I/O and Packages
. 54/86 Programmable I/O Lines (ATmega1281/2561, ATmega640/1280/2560)
. 64-pad QFN/MLF, 64-lead TQFP (ATmega1281/2561)
. 100-lead TQFP, 100-ball CBGA (ATmega640/1280/2560)
. RoHS/Fully Green
. Temperature Range:
. -40亱C to 85亱C Industrial
. Ultra-Low Power Consumption
. Active Mode: 1MHz, 1.8V: 500兪A
. Power-down Mode: 0.1兪A at 1.8V
. Speed Grade:
. ATmega640V/ATmega1280V/ATmega1281V:
. 0 - 4MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V
. ATmega2560V/ATmega2561V:
. 0 - 2MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V
. ATmega640/ATmega1280/ATmega1281:
. 0 - 8MHz @ 2.7V - 5.5V, 0 - 16MHz @ 4.5V - 5.5V
. ATmega2560/ATmega2561:
. 0 - 16MHz @ 4.5V - 5.5V
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash ATmega640/V ATmega1280/V ATmega1281/V ATmega2560/V ATmega2561/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with
64K/128K/256K
Bytes In-System
Programmable
Flash
ATmega640/V
ATmega1280/V
ATmega1281/V
ATmega2560/V
ATmega2561/V
Features
. High Performance, Low Power AtmelR AVRR 8-Bit Microcontroller
. Advanced RISC Architecture
. 135 Powerful Instructions . Most Single Clock Cycle Execution
. 32 亊 8 General Purpose Working Registers
. Fully Static Operation
. Up to 16 MIPS Throughput at 16MHz
. On-Chip 2-cycle Multiplier
. High Endurance Non-volatile Memory Segments
. 64K/128K/256KBytes of In-System Self-Programmable Flash
. 4Kbytes EEPROM
. 8Kbytes Internal SRAM
. Write/Erase Cycles:10,000 Flash/100,000 EEPROM
. Data retention: 20 years at 85亱C/ 100 years at 25亱C
. Optional Boot Code Section with Independent Lock Bits
. In-System Programming by On-chip Boot Program
. True Read-While-Write Operation
. Programming Lock for Software Security
. Endurance: Up to 64Kbytes Optional External Memory Space
. AtmelR QTouchR library support
. Capacitive touch buttons, sliders and wheels
. QTouch and QMatrixR acquisition
. Up to 64 sense channels
. JTAG (IEEE std. 1149.1 compliant) Interface
. Boundary-scan Capabilities According to the JTAG Standard
. Extensive On-chip Debug Support
. Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
. Peripheral Features
. Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
. Four 16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
. Real Time Counter with Separate Oscillator
. Four 8-bit PWM Channels
. Six/Twelve PWM Channels with Programmable Resolution from 2 to 16 Bits
(ATmega1281/2561, ATmega640/1280/2560)
. Output Compare Modulator
. 8/16-channel, 10-bit ADC (ATmega1281/2561, ATmega640/1280/2560)
. Two/Four Programmable Serial USART (ATmega1281/2561, ATmega640/1280/2560)
. Master/Slave SPI Serial Interface
. Byte Oriented 2-wire Serial Interface
. Programmable Watchdog Timer with Separate On-chip Oscillator
. On-chip Analog Comparator
. Interrupt and Wake-up on Pin Change
. Special Microcontroller Features
. Power-on Reset and Programmable Brown-out Detection
. Internal Calibrated Oscillator
. External and Internal Interrupt Sources
. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
and Extended Standby
. I/O and Packages
. 54/86 Programmable I/O Lines (ATmega1281/2561, ATmega640/1280/2560)
. 64-pad QFN/MLF, 64-lead TQFP (ATmega1281/2561)
. 100-lead TQFP, 100-ball CBGA (ATmega640/1280/2560)
. RoHS/Fully Green
. Temperature Range:
. -40亱C to 85亱C Industrial
. Ultra-Low Power Consumption
. Active Mode: 1MHz, 1.8V: 500兪A
. Power-down Mode: 0.1兪A at 1.8V
. Speed Grade:
. ATmega640V/ATmega1280V/ATmega1281V:
. 0 - 4MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V
. ATmega2560V/ATmega2561V:
. 0 - 2MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V
. ATmega640/ATmega1280/ATmega1281:
. 0 - 8MHz @ 2.7V - 5.5V, 0 - 16MHz @ 4.5V - 5.5V
. ATmega2560/ATmega2561:
. 0 - 16MHz @ 4.5V - 5.5V
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash ATmega640/V ATmega1280/V ATmega1281/V ATmega2560/V ATmega2561/V
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
download ATMEL pdf datasheets 8-bit Microcontroller with 16K Bytes In-System Programmable Flash ATmega16 ATmega16L
8-bit
Microcontroller
with 16K Bytes
In-System
Programmable
Flash
ATmega16
ATmega16L
Features
. High-performance, Low-power AtmelR AVRR 8-bit Microcontroller
. Advanced RISC Architecture
. 131 Powerful Instructions . Most Single-clock Cycle Execution
. 32 亊 8 General Purpose Working Registers
. Fully Static Operation
. Up to 16 MIPS Throughput at 16 MHz
. On-chip 2-cycle Multiplier
. High Endurance Non-volatile Memory segments
. 16 Kbytes of In-System Self-programmable Flash program memory
. 512 Bytes EEPROM
. 1 Kbyte Internal SRAM
. Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
. Data retention: 20 years at 85亱C/100 years at 25亱C(1)
. Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
. Programming Lock for Software Security
. JTAG (IEEE std. 1149.1 Compliant) Interface
. Boundary-scan Capabilities According to the JTAG Standard
. Extensive On-chip Debug Support
. Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
. Peripheral Features
. Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
. One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
. Real Time Counter with Separate Oscillator
. Four PWM Channels
. 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels in TQFP Package Only
2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
. Byte-oriented Two-wire Serial Interface
. Programmable Serial USART
. Master/Slave SPI Serial Interface
. Programmable Watchdog Timer with Separate On-chip Oscillator
. On-chip Analog Comparator
. Special Microcontroller Features
. Power-on Reset and Programmable Brown-out Detection
. Internal Calibrated RC Oscillator
. External and Internal Interrupt Sources
. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby
. I/O and Packages
. 32 Programmable I/O Lines
. 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
. Operating Voltages
. 2.7V - 5.5V for ATmega16L
. 4.5V - 5.5V for ATmega16
. Speed Grades
. 0 - 8 MHz for ATmega16L
. 0 - 16 MHz for ATmega16
. Power Consumption @ 1 MHz, 3V, and 25亱C for ATmega16L
. Active: 1.1 mA
. Idle Mode: 0.35 mA
. Power-down Mode: < 1 兪A
Click here to download ATMEL pdf datasheets 8-bit Microcontroller with 16K Bytes In-System Programmable Flash ATmega16 ATmega16L
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with 16K Bytes
In-System
Programmable
Flash
ATmega16
ATmega16L
Features
. High-performance, Low-power AtmelR AVRR 8-bit Microcontroller
. Advanced RISC Architecture
. 131 Powerful Instructions . Most Single-clock Cycle Execution
. 32 亊 8 General Purpose Working Registers
. Fully Static Operation
. Up to 16 MIPS Throughput at 16 MHz
. On-chip 2-cycle Multiplier
. High Endurance Non-volatile Memory segments
. 16 Kbytes of In-System Self-programmable Flash program memory
. 512 Bytes EEPROM
. 1 Kbyte Internal SRAM
. Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
. Data retention: 20 years at 85亱C/100 years at 25亱C(1)
. Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
. Programming Lock for Software Security
. JTAG (IEEE std. 1149.1 Compliant) Interface
. Boundary-scan Capabilities According to the JTAG Standard
. Extensive On-chip Debug Support
. Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
. Peripheral Features
. Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
. One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
. Real Time Counter with Separate Oscillator
. Four PWM Channels
. 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels in TQFP Package Only
2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
. Byte-oriented Two-wire Serial Interface
. Programmable Serial USART
. Master/Slave SPI Serial Interface
. Programmable Watchdog Timer with Separate On-chip Oscillator
. On-chip Analog Comparator
. Special Microcontroller Features
. Power-on Reset and Programmable Brown-out Detection
. Internal Calibrated RC Oscillator
. External and Internal Interrupt Sources
. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby
. I/O and Packages
. 32 Programmable I/O Lines
. 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
. Operating Voltages
. 2.7V - 5.5V for ATmega16L
. 4.5V - 5.5V for ATmega16
. Speed Grades
. 0 - 8 MHz for ATmega16L
. 0 - 16 MHz for ATmega16
. Power Consumption @ 1 MHz, 3V, and 25亱C for ATmega16L
. Active: 1.1 mA
. Idle Mode: 0.35 mA
. Power-down Mode: < 1 兪A
Click here to download ATMEL pdf datasheets 8-bit Microcontroller with 16K Bytes In-System Programmable Flash ATmega16 ATmega16L
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
download ATMEL pdf datasheets AT91SAM ARM-based Flash MCU SAM7SE512 SAM7SE256 SAM7SE32
AT91SAM
ARM-based
Flash MCU
SAM7SE512
SAM7SE256
SAM7SE32
Features
?Incorporates the ARM7TDMI?ARM?Thumb?Processor
?High-performance 32-bit RISC Architecture
?High-density 16-bit Instruction Set
?Leader in MIPS/Watt
?EmbeddedICE?In-circuit Emulation, Debug Communication Channel Support
?Internal High-speed Flash
?512 Kbytes, Organized in Two Contiguous Banks of 1024 Pages of 256 Bytes Dual
Plane (SAM7SE512)
?256 Kbytes (SAM7SE256) Organized in One Bank of 1024 Pages of 256 Bytes
Single Plane (SAM7SE256)
?32 Kbytes (SAM7SE32) Organized in One Bank of 256 Pages of 128 Bytes Single
Plane (SAM7SE32)
?Single Cycle Access at Up to 30 MHz in Worst Case Conditions
?Prefetch Buffer Optimizing Thumb Instruction Execution at Maximum Speed
?Page Programming Time: 6 ms, Including Page Auto-erase, Full Erase Time: 15 ms
?10,000 Erase Cycles, 10-year Data Retention Capability, Sector Lock Capabilities,
Flash Security Bit
?Fast Flash Programming Interface for High Volume Production
?32 Kbytes (SAM7SE512/256) or 8 Kbytes (SAM7SE32) of Internal
High-speed SRAM, Single-cycle Access at Maximum Speed
?One External Bus Interface (EBI)
?Supports SDRAM, Static Memory, Glueless Connection to CompactFlash?and
ECC-enabled NAND Flash
?Memory Controller (MC)
?Embedded Flash Controller
?Memory Protection Unit
?Abort Status and Misalignment Detection
?Reset Controller (RSTC)
?Based on Power-on Reset Cells and Low-power Factory-calibrated Brownout
Detector
?Provides External Reset Signal Shaping and Reset Source Status
?Clock Generator (CKGR)
?Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and One PLL
?Power Management Controller (PMC)
?Power Optimization Capabilities, Including Slow Clock Mode (Down to 500 Hz) and
Idle Mode
?Three Programmable External Clock Signals
?Advanced Interrupt Controller (AIC)
?Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
?Two External Interrupt Sources and One Fast Interrupt Source, Spurious Interrupt
Protected
?Debug Unit (DBGU)
?Two-wire UART and Support for Debug Communication Channel interrupt,
Programmable ICE Access Prevention
?Mode for General Purpose Two-wire UART Serial Communication
?Periodic Interval Timer (PIT)
?20-bit Programmable Counter plus 12-bit Interval Counter
?Windowed Watchdog (WDT)
?12-bit key-protected Programmable Counter
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Flash MCU SAM7SE512 SAM7SE256 SAM7SE32
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
ARM-based
Flash MCU
SAM7SE512
SAM7SE256
SAM7SE32
Features
?Incorporates the ARM7TDMI?ARM?Thumb?Processor
?High-performance 32-bit RISC Architecture
?High-density 16-bit Instruction Set
?Leader in MIPS/Watt
?EmbeddedICE?In-circuit Emulation, Debug Communication Channel Support
?Internal High-speed Flash
?512 Kbytes, Organized in Two Contiguous Banks of 1024 Pages of 256 Bytes Dual
Plane (SAM7SE512)
?256 Kbytes (SAM7SE256) Organized in One Bank of 1024 Pages of 256 Bytes
Single Plane (SAM7SE256)
?32 Kbytes (SAM7SE32) Organized in One Bank of 256 Pages of 128 Bytes Single
Plane (SAM7SE32)
?Single Cycle Access at Up to 30 MHz in Worst Case Conditions
?Prefetch Buffer Optimizing Thumb Instruction Execution at Maximum Speed
?Page Programming Time: 6 ms, Including Page Auto-erase, Full Erase Time: 15 ms
?10,000 Erase Cycles, 10-year Data Retention Capability, Sector Lock Capabilities,
Flash Security Bit
?Fast Flash Programming Interface for High Volume Production
?32 Kbytes (SAM7SE512/256) or 8 Kbytes (SAM7SE32) of Internal
High-speed SRAM, Single-cycle Access at Maximum Speed
?One External Bus Interface (EBI)
?Supports SDRAM, Static Memory, Glueless Connection to CompactFlash?and
ECC-enabled NAND Flash
?Memory Controller (MC)
?Embedded Flash Controller
?Memory Protection Unit
?Abort Status and Misalignment Detection
?Reset Controller (RSTC)
?Based on Power-on Reset Cells and Low-power Factory-calibrated Brownout
Detector
?Provides External Reset Signal Shaping and Reset Source Status
?Clock Generator (CKGR)
?Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and One PLL
?Power Management Controller (PMC)
?Power Optimization Capabilities, Including Slow Clock Mode (Down to 500 Hz) and
Idle Mode
?Three Programmable External Clock Signals
?Advanced Interrupt Controller (AIC)
?Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
?Two External Interrupt Sources and One Fast Interrupt Source, Spurious Interrupt
Protected
?Debug Unit (DBGU)
?Two-wire UART and Support for Debug Communication Channel interrupt,
Programmable ICE Access Prevention
?Mode for General Purpose Two-wire UART Serial Communication
?Periodic Interval Timer (PIT)
?20-bit Programmable Counter plus 12-bit Interval Counter
?Windowed Watchdog (WDT)
?12-bit key-protected Programmable Counter
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Flash MCU SAM7SE512 SAM7SE256 SAM7SE32
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
AT91SAM ARM-based Embedded MPU SAM9260 download ATMEL pdf datasheets
AT91SAM ARM-based Embedded MPU
SAM9260
Features
?180 MHz ARM926EJ-S?ARM?Thumb?Processor
?8 KBytes Data Cache, 8 KBytes Instruction Cache, MMU
?Memories
?32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories,
CompactFlash, SLC NAND Flash with ECC
?Two 4-kbyte internal SRAM, single-cycle access at system speed
?One 32-kbyte internal ROM, embedding bootstrap routine
?Peripherals
?ITU-R BT. 601/656 Image Sensor Interface
?USB Device and USB Host with dedicated On-Chip Transceiver
?10/100 Mbps Ethernet MAC Controller
?One High Speed Memory Card Host
?Two Master/Slave Serial Peripheral Interfaces
?Two Three-channel 32-bit Timer/Counters
?One Synchronous Serial Controller
?One Two-wire Interface
?Four USARTs
?Two UARTs
?4-channel 10-bit ADC
?System
?90 MHz six 32-bit layer AHB Bus Matrix
?22 Peripheral DMA Channels
?Boot from NAND Flash, DataFlash?or serial DataFlash
?Reset Controller with On-Chip Power-on Reset
?Selectable 32,768 Hz Low-Power and 3-20 MHz Main Oscillator
?Internal Low-Power 32 kHz RC Oscillator
?One PLL for the system and one PLL optimized for USB
?Two Programmable External Clock Signals
?Advanced Interrupt Controller and Debug Unit
?Periodic Interval Timer, Watchdog Timer and Real Time Timer
?I/O
?Three 32-bit Parallel Input/Output Controllers
?96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
?Package
?217-ball BGA, 0.8 mm pitch
?208-pin QFP, 0.5 mm pitch
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Embedded MPU SAM9260
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
SAM9260
Features
?180 MHz ARM926EJ-S?ARM?Thumb?Processor
?8 KBytes Data Cache, 8 KBytes Instruction Cache, MMU
?Memories
?32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories,
CompactFlash, SLC NAND Flash with ECC
?Two 4-kbyte internal SRAM, single-cycle access at system speed
?One 32-kbyte internal ROM, embedding bootstrap routine
?Peripherals
?ITU-R BT. 601/656 Image Sensor Interface
?USB Device and USB Host with dedicated On-Chip Transceiver
?10/100 Mbps Ethernet MAC Controller
?One High Speed Memory Card Host
?Two Master/Slave Serial Peripheral Interfaces
?Two Three-channel 32-bit Timer/Counters
?One Synchronous Serial Controller
?One Two-wire Interface
?Four USARTs
?Two UARTs
?4-channel 10-bit ADC
?System
?90 MHz six 32-bit layer AHB Bus Matrix
?22 Peripheral DMA Channels
?Boot from NAND Flash, DataFlash?or serial DataFlash
?Reset Controller with On-Chip Power-on Reset
?Selectable 32,768 Hz Low-Power and 3-20 MHz Main Oscillator
?Internal Low-Power 32 kHz RC Oscillator
?One PLL for the system and one PLL optimized for USB
?Two Programmable External Clock Signals
?Advanced Interrupt Controller and Debug Unit
?Periodic Interval Timer, Watchdog Timer and Real Time Timer
?I/O
?Three 32-bit Parallel Input/Output Controllers
?96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
?Package
?217-ball BGA, 0.8 mm pitch
?208-pin QFP, 0.5 mm pitch
Click here to download ATMEL pdf datasheets AT91SAM ARM-based Embedded MPU SAM9260
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 8K/16K Bytes In-System Programmable Flash and LIN Controller ATtiny87 ATtiny167
8-bit Atmel
Microcontroller
with 8K/16K
Bytes In-System
Programmable
Flash and LIN
Controller
ATtiny87
ATtiny167
Features
• High Performance, Low Power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 123 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
• Non-volatile Program and Data Memories
– 8K/16K Bytes of In-System Programmable Flash Program Memory
• Endurance: 10,000 Write/Erase Cycles
– 512 Bytes of In-System Programmable EEPROM
• Endurance: 100,000 Write/Erase Cycles
– 512 Bytes of Internal SRAM
– Data retention: 20 Years at 85°C / 100 Years at 25°C
– In-System Programmable via SPI Port
– Low size LIN/UART Software In-System Programmable
– Programming Lock for Software Security
• Peripheral Features
– LIN 2.1 and 1.3 Controller or 8-bit UART
– One 8-bit Asynchronous Timer/Counter with Prescaler
• Output Compare or 8-bit PWM Channel
– One 16-bit Synchronous Timer/Counter with Prescaler
• External Event Counter
• 2 Output Compare Units or PWM Channels each Driving up to 4 Output Pins
– Master/Slave SPI Serial Interface
– Universal Serial Interface with Start Condition Detector
– 10-bit ADC
• 11 Single Ended Channels
• 8 Differential ADC Channel Pairs with Programmable Gain (8x or 20x)
– On-chip Analog Comparator with Selectable Voltage Reference
– 100 μA ±10% Current Source for LIN Node Identification
– On-chip Temperature Sensor
– Programmable Watchdog Timer with Separate On-chip Oscillator
• Special Microcontroller Features
– Software Controlled Clock Switching for Power Control, EMC Reduction
– debugWIRE On-chip Debug System
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, and Power-down Modes
– Power-on Reset and Programmable Brown-out Detection
– Internal 8MHz Calibrated Oscillator
– 4-16 MHz and 32 KHz Crystal/Ceramic Resonator Oscillators
• I/O and Packages
– 16 Programmable I/O Lines
– 20-pin SOIC, 32-pad VQFN and 20-pin TSSOP
• Operating Voltage:
– 1.8 – 5.5V for ATtiny87/167
• Speed Grade:
– 0 – 4 MHz @ 1.8 – 5.5V
– 0 – 8 MHz @ 2.7 – 5.5V
– 0 – 16 MHz @ 4.5 – 5.5V
• Industrial Temperature Range
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 8K/16K Bytes In-System Programmable Flash and LIN Controller ATtiny87 ATtiny167
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Microcontroller
with 8K/16K
Bytes In-System
Programmable
Flash and LIN
Controller
ATtiny87
ATtiny167
Features
• High Performance, Low Power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 123 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
• Non-volatile Program and Data Memories
– 8K/16K Bytes of In-System Programmable Flash Program Memory
• Endurance: 10,000 Write/Erase Cycles
– 512 Bytes of In-System Programmable EEPROM
• Endurance: 100,000 Write/Erase Cycles
– 512 Bytes of Internal SRAM
– Data retention: 20 Years at 85°C / 100 Years at 25°C
– In-System Programmable via SPI Port
– Low size LIN/UART Software In-System Programmable
– Programming Lock for Software Security
• Peripheral Features
– LIN 2.1 and 1.3 Controller or 8-bit UART
– One 8-bit Asynchronous Timer/Counter with Prescaler
• Output Compare or 8-bit PWM Channel
– One 16-bit Synchronous Timer/Counter with Prescaler
• External Event Counter
• 2 Output Compare Units or PWM Channels each Driving up to 4 Output Pins
– Master/Slave SPI Serial Interface
– Universal Serial Interface with Start Condition Detector
– 10-bit ADC
• 11 Single Ended Channels
• 8 Differential ADC Channel Pairs with Programmable Gain (8x or 20x)
– On-chip Analog Comparator with Selectable Voltage Reference
– 100 μA ±10% Current Source for LIN Node Identification
– On-chip Temperature Sensor
– Programmable Watchdog Timer with Separate On-chip Oscillator
• Special Microcontroller Features
– Software Controlled Clock Switching for Power Control, EMC Reduction
– debugWIRE On-chip Debug System
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, and Power-down Modes
– Power-on Reset and Programmable Brown-out Detection
– Internal 8MHz Calibrated Oscillator
– 4-16 MHz and 32 KHz Crystal/Ceramic Resonator Oscillators
• I/O and Packages
– 16 Programmable I/O Lines
– 20-pin SOIC, 32-pad VQFN and 20-pin TSSOP
• Operating Voltage:
– 1.8 – 5.5V for ATtiny87/167
• Speed Grade:
– 0 – 4 MHz @ 1.8 – 5.5V
– 0 – 8 MHz @ 2.7 – 5.5V
– 0 – 16 MHz @ 4.5 – 5.5V
• Industrial Temperature Range
Click here to download ATMEL pdf datasheets 8-bit Atmel Microcontroller with 8K/16K Bytes In-System Programmable Flash and LIN Controller ATtiny87 ATtiny167
TopDatasheet-IC chip circuits ATMEL Quantum pdf datasheets download
Subscribe to:
Posts (Atom)